|
|
HELIO-PAN II Flexible shaft measuring center |
With the modular shaft measuring center HELIO-PAN II turned parts can be measured in a fast and flexible way. Independent of the operator influence, the HELIO-PAN II delivers highly accurate measuring results with excellent repeatability.
The most important parameters that can be measured: Lengths, diameters, distances, incremental dimensions, widths of recesses, distance to circle centers, depths, diameter of recesses, angles, diameters of recesses, angles, radii, position of cross holes, throw on crankshafts and camshafts, run-out, run-out referred to work-piece axis, roundness, axial run-out, coaxiality, symmetry, parallelism, straightness, taper angle, distances to taper intersection, pitch measurement.
|
Resolution of the diameter measuring system (X-axis) : |
0.001 mm / 0.0001 mm |
|
Measuring uncertainty (X-axis) : |
(1 + L/100) µm (L in mm) |
|
Measuring range for lengths (Z-axis) : |
400 mm, 800 mm or 1200 mm (special up to 4 m) |
|
Resolution of the length measuring system (Z-axis) : |
0.01 mm / 0.001 mm |
|
Measuring uncertainty (Z-axis) : |
(3 + L/100) µm (L in mm) |
|
Maximum weight of the piece to be measured : |
20 kgp |
|
|